feature-remoteid/RemoteIDModule/RemoteIDModule.ino

/*
  implement OpenDroneID MAVLink and DroneCAN support
 */
/*
  released under GNU GPL v2 or later
 */

#include "options.h"
#include <Arduino.h>
#include "version.h"
#include <math.h>
#include <time.h>
#include <sys/time.h>
#include <opendroneid.h>
#include "mavlink.h"
#include "DroneCAN.h"
#include "WiFi_TX.h"
#include "BLE_TX.h"
#include <esp_wifi.h>
#include <WiFi.h>
#include "parameters.h"
#include "webinterface.h"
#include "check_firmware.h"
#include <esp_ota_ops.h>
#include "efuse.h"
#include "led.h"

#if AP_DRONECAN_ENABLED
static DroneCAN dronecan;
#endif

#if AP_MAVLINK_ENABLED
static MAVLinkSerial mavlink1{Serial1, MAVLINK_COMM_0};
static MAVLinkSerial mavlink2{Serial,  MAVLINK_COMM_1};
#endif

static WiFi_TX wifi;
static BLE_TX ble;

#define DEBUG_BAUDRATE 57600

// OpenDroneID output data structure
ODID_UAS_Data UAS_data;
static uint32_t last_location_ms;
static WebInterface webif;

#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"

static bool arm_check_ok = false; // goes true for LED arm check status
static bool pfst_check_ok = false; 

/*
  setup serial ports
 */
void setup()
{
    // disable brownout checking
    WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);

    g.init();

    led.set_state(Led::LedState::INIT);
    led.update();

    if (g.webserver_enable) {
        // need WiFi for web server
        wifi.init();
    }

    // Serial for debug printf
    Serial.begin(g.baudrate);

    // Serial1 for MAVLink
    Serial1.begin(g.baudrate, SERIAL_8N1, PIN_UART_RX, PIN_UART_TX);

    // set all fields to invalid/initial values
    odid_initUasData(&UAS_data);

#if AP_MAVLINK_ENABLED
    mavlink1.init();
    mavlink2.init();
#endif
#if AP_DRONECAN_ENABLED
    dronecan.init();
#endif

    set_efuses();

    CheckFirmware::check_OTA_running();

#if defined(PIN_CAN_EN)
    // optional CAN enable pin
    pinMode(PIN_CAN_EN, OUTPUT);
    digitalWrite(PIN_CAN_EN, HIGH);
#endif

#if defined(PIN_CAN_nSILENT)
    // disable silent pin
    pinMode(PIN_CAN_nSILENT, OUTPUT);
    digitalWrite(PIN_CAN_nSILENT, HIGH);
#endif

#if defined(PIN_CAN_TERM)
    // optional CAN termination control
    pinMode(PIN_CAN_TERM, OUTPUT);
    digitalWrite(PIN_CAN_TERM, HIGH);
#endif

    pfst_check_ok = true;   // note - this will need to be expanded to better capture PFST test status

    // initially set LED for fail
    led.set_state(Led::LedState::ARM_FAIL);

    esp_log_level_set("*", ESP_LOG_DEBUG);

    esp_ota_mark_app_valid_cancel_rollback();
}

#define IMIN(x,y) ((x)<(y)?(x):(y))
#define ODID_COPY_STR(to, from) strncpy(to, (const char*)from, IMIN(sizeof(to), sizeof(from)))

/*
  check parsing of UAS_data, this checks ranges of values to ensure we
  will produce a valid pack
 */
static const char *check_parse(void)
{
    {
        ODID_Location_encoded encoded {};
        if (encodeLocationMessage(&encoded, &UAS_data.Location) != ODID_SUCCESS) {
            return "bad LOCATION data";
        }
    }
    {
        ODID_System_encoded encoded {};
        if (encodeSystemMessage(&encoded, &UAS_data.System) != ODID_SUCCESS) {
            return "bad SYSTEM data";
        }
    }
    {
        ODID_BasicID_encoded encoded {};
        if (encodeBasicIDMessage(&encoded, &UAS_data.BasicID[0]) != ODID_SUCCESS) {
            return "bad BASIC_ID data";
        }
    }
    {
        ODID_SelfID_encoded encoded {};
        if (encodeSelfIDMessage(&encoded, &UAS_data.SelfID) != ODID_SUCCESS) {
            return "bad SELF_ID data";
        }
    }
    {
        ODID_OperatorID_encoded encoded {};
        if (encodeOperatorIDMessage(&encoded, &UAS_data.OperatorID) != ODID_SUCCESS) {
            return "bad OPERATOR_ID data";
        }
    }
    return nullptr;
}

/*
  fill in UAS_data from MAVLink packets
 */
static void set_data(Transport &t)
{
    const auto &operator_id = t.get_operator_id();
    const auto &basic_id = t.get_basic_id();
    const auto &system = t.get_system();
    const auto &self_id = t.get_self_id();
    const auto &location = t.get_location();

    /*
      if we don't have BasicID info from parameters and we have it
      from the DroneCAN or MAVLink transport then copy it to the
      parameters to persist it. This makes it possible to set the
      UAS_ID string via a MAVLink BASIC_ID message and also offers a
      migration path from the old approach of GCS setting these values
      to having them as parameters
     */
    if (!g.have_basic_id_info()) {
        if (basic_id.ua_type != 0 &&
            basic_id.id_type != 0 &&
            strnlen((const char *)basic_id.uas_id, 20) > 0) {
            g.set_by_name_uint8("UAS_TYPE", basic_id.ua_type);
            g.set_by_name_uint8("UAS_ID_TYPE", basic_id.id_type);
            char uas_id[21] {};
            ODID_COPY_STR(uas_id, basic_id.uas_id);
            g.set_by_name_string("UAS_ID", uas_id);
        }
    }

    // BasicID
    if (g.have_basic_id_info()) {
        // from parameters
        UAS_data.BasicID[0].UAType = (ODID_uatype_t)g.ua_type;
        UAS_data.BasicID[0].IDType = (ODID_idtype_t)g.id_type;
        ODID_COPY_STR(UAS_data.BasicID[0].UASID, g.uas_id);
    } else {
        // from transport
        UAS_data.BasicID[0].UAType = (ODID_uatype_t)basic_id.ua_type;
        UAS_data.BasicID[0].IDType = (ODID_idtype_t)basic_id.id_type;
        ODID_COPY_STR(UAS_data.BasicID[0].UASID, basic_id.uas_id);
    }
    UAS_data.BasicIDValid[0] = 1;

    // OperatorID
    UAS_data.OperatorID.OperatorIdType = (ODID_operatorIdType_t)operator_id.operator_id_type;
    ODID_COPY_STR(UAS_data.OperatorID.OperatorId, operator_id.operator_id);
    UAS_data.OperatorIDValid = 1;

    // SelfID
    UAS_data.SelfID.DescType = (ODID_desctype_t)self_id.description_type;
    ODID_COPY_STR(UAS_data.SelfID.Desc, self_id.description);
    UAS_data.SelfIDValid = 1;

    // System
    if (system.timestamp != 0) {
        UAS_data.System.OperatorLocationType = (ODID_operator_location_type_t)system.operator_location_type;
        UAS_data.System.ClassificationType = (ODID_classification_type_t)system.classification_type;
        UAS_data.System.OperatorLatitude = system.operator_latitude * 1.0e-7;
        UAS_data.System.OperatorLongitude = system.operator_longitude * 1.0e-7;
        UAS_data.System.AreaCount = system.area_count;
        UAS_data.System.AreaRadius = system.area_radius;
        UAS_data.System.AreaCeiling = system.area_ceiling;
        UAS_data.System.AreaFloor = system.area_floor;
        UAS_data.System.CategoryEU = (ODID_category_EU_t)system.category_eu;
        UAS_data.System.ClassEU = (ODID_class_EU_t)system.class_eu;
        UAS_data.System.OperatorAltitudeGeo = system.operator_altitude_geo;
        UAS_data.System.Timestamp = system.timestamp;
        UAS_data.SystemValid = 1;
    }

    // Location
    if (location.timestamp != 0) {
        UAS_data.Location.Status = (ODID_status_t)location.status;
        UAS_data.Location.Direction = location.direction*0.01;
        UAS_data.Location.SpeedHorizontal = location.speed_horizontal*0.01;
        UAS_data.Location.SpeedVertical = location.speed_vertical*0.01;
        UAS_data.Location.Latitude = location.latitude*1.0e-7;
        UAS_data.Location.Longitude = location.longitude*1.0e-7;
        UAS_data.Location.AltitudeBaro = location.altitude_barometric;
        UAS_data.Location.AltitudeGeo = location.altitude_geodetic;
        UAS_data.Location.HeightType = (ODID_Height_reference_t)location.height_reference;
        UAS_data.Location.Height = location.height;
        UAS_data.Location.HorizAccuracy = (ODID_Horizontal_accuracy_t)location.horizontal_accuracy;
        UAS_data.Location.VertAccuracy = (ODID_Vertical_accuracy_t)location.vertical_accuracy;
        UAS_data.Location.BaroAccuracy = (ODID_Vertical_accuracy_t)location.barometer_accuracy;
        UAS_data.Location.SpeedAccuracy = (ODID_Speed_accuracy_t)location.speed_accuracy;
        UAS_data.Location.TSAccuracy = (ODID_Timestamp_accuracy_t)location.timestamp_accuracy;
        UAS_data.Location.TimeStamp = location.timestamp;
        UAS_data.LocationValid = 1;
    }

    const char *reason = check_parse();
    if (reason == nullptr) {
        t.arm_status_check(reason);
    }
    t.set_parse_fail(reason);

    arm_check_ok = (reason==nullptr);
    led.set_state(pfst_check_ok && arm_check_ok? Led::LedState::ARM_OK : Led::LedState::ARM_FAIL);

    uint32_t now_ms = millis();
    uint32_t location_age_ms = now_ms - t.get_last_location_ms();
    uint32_t last_location_age_ms = now_ms - last_location_ms;
    if (location_age_ms < last_location_age_ms) {
        last_location_ms = t.get_last_location_ms();
    }
}

static uint8_t loop_counter = 0;

void loop()
{
#if AP_MAVLINK_ENABLED
    mavlink1.update();
    mavlink2.update();
#endif
#if AP_DRONECAN_ENABLED
    dronecan.update();
#endif

    const uint32_t now_ms = millis();

    if (g.webserver_enable) {
        webif.update();
    }

    // the transports have common static data, so we can just use the
    // first for status
#if AP_MAVLINK_ENABLED
    auto &transport = mavlink1;
#elif AP_DRONECAN_ENABLED
    auto &transport = dronecan;
#else
    #error "Must enable DroneCAN or MAVLink"
#endif

    bool have_location = false;
    const uint32_t last_location_ms = transport.get_last_location_ms();
    const uint32_t last_system_ms = transport.get_last_system_ms();

    led.update();

    if (g.bcast_powerup) {
        // if we are broadcasting on powerup we always mark location valid
        // so the location with default data is sent
        if (!UAS_data.LocationValid) {
            UAS_data.Location.Status = ODID_STATUS_REMOTE_ID_SYSTEM_FAILURE;
            UAS_data.LocationValid = 1;
        }
    } else {
        // only broadcast if we have received a location at least once
        if (last_location_ms == 0) {
            delay(1);
            return;
        }
    }

    if (last_location_ms == 0 ||
        now_ms - last_location_ms > 5000) {
        UAS_data.Location.Status = ODID_STATUS_REMOTE_ID_SYSTEM_FAILURE;
    }

    if (last_system_ms == 0 ||
        now_ms - last_system_ms > 5000) {
        UAS_data.Location.Status = ODID_STATUS_REMOTE_ID_SYSTEM_FAILURE;
    }

    if (transport.get_parse_fail() != nullptr) {
        UAS_data.Location.Status = ODID_STATUS_REMOTE_ID_SYSTEM_FAILURE;
    }
    
    set_data(transport);

    static uint32_t last_update_wifi_nan_ms;
    if (g.wifi_nan_rate > 0 &&
        now_ms - last_update_wifi_nan_ms > 1000/g.wifi_nan_rate) {
        last_update_wifi_nan_ms = now_ms;
        wifi.transmit_nan(UAS_data);
    }

    static uint32_t last_update_wifi_beacon_ms;
    if (g.wifi_beacon_rate > 0 &&
        now_ms - last_update_wifi_beacon_ms > 1000/g.wifi_beacon_rate) {
        last_update_wifi_beacon_ms = now_ms;
        wifi.transmit_beacon(UAS_data);
    }

    static uint32_t last_update_bt5_ms;
    if (g.bt5_rate > 0 &&
        now_ms - last_update_bt5_ms > 1000/g.bt5_rate) {
        last_update_bt5_ms = now_ms;
        ble.transmit_longrange(UAS_data);
    }

    static uint32_t last_update_bt4_ms;
    if (g.bt4_rate > 0 &&
        now_ms - last_update_bt4_ms > 200/g.bt4_rate) {
        last_update_bt4_ms = now_ms;
        ble.transmit_legacy(UAS_data);
        ble.transmit_legacy_name(UAS_data);
    }

    // sleep for a bit for power saving
    delay(1);
}