123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344 |
- #pragma once
- // MESSAGE PING PACKING
- #define MAVLINK_MSG_ID_PING 4
- typedef struct __mavlink_ping_t {
- uint64_t time_usec; /*< [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.*/
- uint32_t seq; /*< PING sequence*/
- uint8_t target_system; /*< 0: request ping from all receiving systems. If greater than 0: message is a ping response and number is the system id of the requesting system*/
- uint8_t target_component; /*< 0: request ping from all receiving components. If greater than 0: message is a ping response and number is the component id of the requesting component.*/
- } mavlink_ping_t;
- #define MAVLINK_MSG_ID_PING_LEN 14
- #define MAVLINK_MSG_ID_PING_MIN_LEN 14
- #define MAVLINK_MSG_ID_4_LEN 14
- #define MAVLINK_MSG_ID_4_MIN_LEN 14
- #define MAVLINK_MSG_ID_PING_CRC 237
- #define MAVLINK_MSG_ID_4_CRC 237
- #if MAVLINK_COMMAND_24BIT
- #define MAVLINK_MESSAGE_INFO_PING { \
- 4, \
- "PING", \
- 4, \
- { { "time_usec", NULL, MAVLINK_TYPE_UINT64_T, 0, 0, offsetof(mavlink_ping_t, time_usec) }, \
- { "seq", NULL, MAVLINK_TYPE_UINT32_T, 0, 8, offsetof(mavlink_ping_t, seq) }, \
- { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 12, offsetof(mavlink_ping_t, target_system) }, \
- { "target_component", NULL, MAVLINK_TYPE_UINT8_T, 0, 13, offsetof(mavlink_ping_t, target_component) }, \
- } \
- }
- #else
- #define MAVLINK_MESSAGE_INFO_PING { \
- "PING", \
- 4, \
- { { "time_usec", NULL, MAVLINK_TYPE_UINT64_T, 0, 0, offsetof(mavlink_ping_t, time_usec) }, \
- { "seq", NULL, MAVLINK_TYPE_UINT32_T, 0, 8, offsetof(mavlink_ping_t, seq) }, \
- { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 12, offsetof(mavlink_ping_t, target_system) }, \
- { "target_component", NULL, MAVLINK_TYPE_UINT8_T, 0, 13, offsetof(mavlink_ping_t, target_component) }, \
- } \
- }
- #endif
- /**
- * @brief Pack a ping message
- * @param system_id ID of this system
- * @param component_id ID of this component (e.g. 200 for IMU)
- * @param msg The MAVLink message to compress the data into
- *
- * @param time_usec [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
- * @param seq PING sequence
- * @param target_system 0: request ping from all receiving systems. If greater than 0: message is a ping response and number is the system id of the requesting system
- * @param target_component 0: request ping from all receiving components. If greater than 0: message is a ping response and number is the component id of the requesting component.
- * @return length of the message in bytes (excluding serial stream start sign)
- */
- static inline uint16_t mavlink_msg_ping_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
- uint64_t time_usec, uint32_t seq, uint8_t target_system, uint8_t target_component)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- char buf[MAVLINK_MSG_ID_PING_LEN];
- _mav_put_uint64_t(buf, 0, time_usec);
- _mav_put_uint32_t(buf, 8, seq);
- _mav_put_uint8_t(buf, 12, target_system);
- _mav_put_uint8_t(buf, 13, target_component);
- memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_PING_LEN);
- #else
- mavlink_ping_t packet;
- packet.time_usec = time_usec;
- packet.seq = seq;
- packet.target_system = target_system;
- packet.target_component = target_component;
- memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_PING_LEN);
- #endif
- msg->msgid = MAVLINK_MSG_ID_PING;
- return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- }
- /**
- * @brief Pack a ping message
- * @param system_id ID of this system
- * @param component_id ID of this component (e.g. 200 for IMU)
- * @param status MAVLink status structure
- * @param msg The MAVLink message to compress the data into
- *
- * @param time_usec [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
- * @param seq PING sequence
- * @param target_system 0: request ping from all receiving systems. If greater than 0: message is a ping response and number is the system id of the requesting system
- * @param target_component 0: request ping from all receiving components. If greater than 0: message is a ping response and number is the component id of the requesting component.
- * @return length of the message in bytes (excluding serial stream start sign)
- */
- static inline uint16_t mavlink_msg_ping_pack_status(uint8_t system_id, uint8_t component_id, mavlink_status_t *_status, mavlink_message_t* msg,
- uint64_t time_usec, uint32_t seq, uint8_t target_system, uint8_t target_component)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- char buf[MAVLINK_MSG_ID_PING_LEN];
- _mav_put_uint64_t(buf, 0, time_usec);
- _mav_put_uint32_t(buf, 8, seq);
- _mav_put_uint8_t(buf, 12, target_system);
- _mav_put_uint8_t(buf, 13, target_component);
- memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_PING_LEN);
- #else
- mavlink_ping_t packet;
- packet.time_usec = time_usec;
- packet.seq = seq;
- packet.target_system = target_system;
- packet.target_component = target_component;
- memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_PING_LEN);
- #endif
- msg->msgid = MAVLINK_MSG_ID_PING;
- #if MAVLINK_CRC_EXTRA
- return mavlink_finalize_message_buffer(msg, system_id, component_id, _status, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- #else
- return mavlink_finalize_message_buffer(msg, system_id, component_id, _status, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN);
- #endif
- }
- /**
- * @brief Pack a ping message on a channel
- * @param system_id ID of this system
- * @param component_id ID of this component (e.g. 200 for IMU)
- * @param chan The MAVLink channel this message will be sent over
- * @param msg The MAVLink message to compress the data into
- * @param time_usec [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
- * @param seq PING sequence
- * @param target_system 0: request ping from all receiving systems. If greater than 0: message is a ping response and number is the system id of the requesting system
- * @param target_component 0: request ping from all receiving components. If greater than 0: message is a ping response and number is the component id of the requesting component.
- * @return length of the message in bytes (excluding serial stream start sign)
- */
- static inline uint16_t mavlink_msg_ping_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
- mavlink_message_t* msg,
- uint64_t time_usec,uint32_t seq,uint8_t target_system,uint8_t target_component)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- char buf[MAVLINK_MSG_ID_PING_LEN];
- _mav_put_uint64_t(buf, 0, time_usec);
- _mav_put_uint32_t(buf, 8, seq);
- _mav_put_uint8_t(buf, 12, target_system);
- _mav_put_uint8_t(buf, 13, target_component);
- memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_PING_LEN);
- #else
- mavlink_ping_t packet;
- packet.time_usec = time_usec;
- packet.seq = seq;
- packet.target_system = target_system;
- packet.target_component = target_component;
- memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_PING_LEN);
- #endif
- msg->msgid = MAVLINK_MSG_ID_PING;
- return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- }
- /**
- * @brief Encode a ping struct
- *
- * @param system_id ID of this system
- * @param component_id ID of this component (e.g. 200 for IMU)
- * @param msg The MAVLink message to compress the data into
- * @param ping C-struct to read the message contents from
- */
- static inline uint16_t mavlink_msg_ping_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_ping_t* ping)
- {
- return mavlink_msg_ping_pack(system_id, component_id, msg, ping->time_usec, ping->seq, ping->target_system, ping->target_component);
- }
- /**
- * @brief Encode a ping struct on a channel
- *
- * @param system_id ID of this system
- * @param component_id ID of this component (e.g. 200 for IMU)
- * @param chan The MAVLink channel this message will be sent over
- * @param msg The MAVLink message to compress the data into
- * @param ping C-struct to read the message contents from
- */
- static inline uint16_t mavlink_msg_ping_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_ping_t* ping)
- {
- return mavlink_msg_ping_pack_chan(system_id, component_id, chan, msg, ping->time_usec, ping->seq, ping->target_system, ping->target_component);
- }
- /**
- * @brief Encode a ping struct with provided status structure
- *
- * @param system_id ID of this system
- * @param component_id ID of this component (e.g. 200 for IMU)
- * @param status MAVLink status structure
- * @param msg The MAVLink message to compress the data into
- * @param ping C-struct to read the message contents from
- */
- static inline uint16_t mavlink_msg_ping_encode_status(uint8_t system_id, uint8_t component_id, mavlink_status_t* _status, mavlink_message_t* msg, const mavlink_ping_t* ping)
- {
- return mavlink_msg_ping_pack_status(system_id, component_id, _status, msg, ping->time_usec, ping->seq, ping->target_system, ping->target_component);
- }
- /**
- * @brief Send a ping message
- * @param chan MAVLink channel to send the message
- *
- * @param time_usec [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
- * @param seq PING sequence
- * @param target_system 0: request ping from all receiving systems. If greater than 0: message is a ping response and number is the system id of the requesting system
- * @param target_component 0: request ping from all receiving components. If greater than 0: message is a ping response and number is the component id of the requesting component.
- */
- #ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
- static inline void mavlink_msg_ping_send(mavlink_channel_t chan, uint64_t time_usec, uint32_t seq, uint8_t target_system, uint8_t target_component)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- char buf[MAVLINK_MSG_ID_PING_LEN];
- _mav_put_uint64_t(buf, 0, time_usec);
- _mav_put_uint32_t(buf, 8, seq);
- _mav_put_uint8_t(buf, 12, target_system);
- _mav_put_uint8_t(buf, 13, target_component);
- _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, buf, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- #else
- mavlink_ping_t packet;
- packet.time_usec = time_usec;
- packet.seq = seq;
- packet.target_system = target_system;
- packet.target_component = target_component;
- _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, (const char *)&packet, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- #endif
- }
- /**
- * @brief Send a ping message
- * @param chan MAVLink channel to send the message
- * @param struct The MAVLink struct to serialize
- */
- static inline void mavlink_msg_ping_send_struct(mavlink_channel_t chan, const mavlink_ping_t* ping)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- mavlink_msg_ping_send(chan, ping->time_usec, ping->seq, ping->target_system, ping->target_component);
- #else
- _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, (const char *)ping, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- #endif
- }
- #if MAVLINK_MSG_ID_PING_LEN <= MAVLINK_MAX_PAYLOAD_LEN
- /*
- This variant of _send() can be used to save stack space by re-using
- memory from the receive buffer. The caller provides a
- mavlink_message_t which is the size of a full mavlink message. This
- is usually the receive buffer for the channel, and allows a reply to an
- incoming message with minimum stack space usage.
- */
- static inline void mavlink_msg_ping_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint32_t seq, uint8_t target_system, uint8_t target_component)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- char *buf = (char *)msgbuf;
- _mav_put_uint64_t(buf, 0, time_usec);
- _mav_put_uint32_t(buf, 8, seq);
- _mav_put_uint8_t(buf, 12, target_system);
- _mav_put_uint8_t(buf, 13, target_component);
- _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, buf, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- #else
- mavlink_ping_t *packet = (mavlink_ping_t *)msgbuf;
- packet->time_usec = time_usec;
- packet->seq = seq;
- packet->target_system = target_system;
- packet->target_component = target_component;
- _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, (const char *)packet, MAVLINK_MSG_ID_PING_MIN_LEN, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC);
- #endif
- }
- #endif
- #endif
- // MESSAGE PING UNPACKING
- /**
- * @brief Get field time_usec from ping message
- *
- * @return [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
- */
- static inline uint64_t mavlink_msg_ping_get_time_usec(const mavlink_message_t* msg)
- {
- return _MAV_RETURN_uint64_t(msg, 0);
- }
- /**
- * @brief Get field seq from ping message
- *
- * @return PING sequence
- */
- static inline uint32_t mavlink_msg_ping_get_seq(const mavlink_message_t* msg)
- {
- return _MAV_RETURN_uint32_t(msg, 8);
- }
- /**
- * @brief Get field target_system from ping message
- *
- * @return 0: request ping from all receiving systems. If greater than 0: message is a ping response and number is the system id of the requesting system
- */
- static inline uint8_t mavlink_msg_ping_get_target_system(const mavlink_message_t* msg)
- {
- return _MAV_RETURN_uint8_t(msg, 12);
- }
- /**
- * @brief Get field target_component from ping message
- *
- * @return 0: request ping from all receiving components. If greater than 0: message is a ping response and number is the component id of the requesting component.
- */
- static inline uint8_t mavlink_msg_ping_get_target_component(const mavlink_message_t* msg)
- {
- return _MAV_RETURN_uint8_t(msg, 13);
- }
- /**
- * @brief Decode a ping message into a struct
- *
- * @param msg The message to decode
- * @param ping C-struct to decode the message contents into
- */
- static inline void mavlink_msg_ping_decode(const mavlink_message_t* msg, mavlink_ping_t* ping)
- {
- #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
- ping->time_usec = mavlink_msg_ping_get_time_usec(msg);
- ping->seq = mavlink_msg_ping_get_seq(msg);
- ping->target_system = mavlink_msg_ping_get_target_system(msg);
- ping->target_component = mavlink_msg_ping_get_target_component(msg);
- #else
- uint8_t len = msg->len < MAVLINK_MSG_ID_PING_LEN? msg->len : MAVLINK_MSG_ID_PING_LEN;
- memset(ping, 0, MAVLINK_MSG_ID_PING_LEN);
- memcpy(ping, _MAV_PAYLOAD(msg), len);
- #endif
- }
|