mavlink_msg_set_position_target_global_int.h 31 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588
  1. #pragma once
  2. // MESSAGE SET_POSITION_TARGET_GLOBAL_INT PACKING
  3. #define MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT 86
  4. typedef struct __mavlink_set_position_target_global_int_t {
  5. uint32_t time_boot_ms; /*< [ms] Timestamp (time since system boot). The rationale for the timestamp in the setpoint is to allow the system to compensate for the transport delay of the setpoint. This allows the system to compensate processing latency.*/
  6. int32_t lat_int; /*< [degE7] X Position in WGS84 frame*/
  7. int32_t lon_int; /*< [degE7] Y Position in WGS84 frame*/
  8. float alt; /*< [m] Altitude (MSL, Relative to home, or AGL - depending on frame)*/
  9. float vx; /*< [m/s] X velocity in NED frame*/
  10. float vy; /*< [m/s] Y velocity in NED frame*/
  11. float vz; /*< [m/s] Z velocity in NED frame*/
  12. float afx; /*< [m/s/s] X acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N*/
  13. float afy; /*< [m/s/s] Y acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N*/
  14. float afz; /*< [m/s/s] Z acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N*/
  15. float yaw; /*< [rad] yaw setpoint*/
  16. float yaw_rate; /*< [rad/s] yaw rate setpoint*/
  17. uint16_t type_mask; /*< Bitmap to indicate which dimensions should be ignored by the vehicle.*/
  18. uint8_t target_system; /*< System ID*/
  19. uint8_t target_component; /*< Component ID*/
  20. uint8_t coordinate_frame; /*< Valid options are: MAV_FRAME_GLOBAL_INT = 5, MAV_FRAME_GLOBAL_RELATIVE_ALT_INT = 6, MAV_FRAME_GLOBAL_TERRAIN_ALT_INT = 11*/
  21. } mavlink_set_position_target_global_int_t;
  22. #define MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN 53
  23. #define MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN 53
  24. #define MAVLINK_MSG_ID_86_LEN 53
  25. #define MAVLINK_MSG_ID_86_MIN_LEN 53
  26. #define MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC 5
  27. #define MAVLINK_MSG_ID_86_CRC 5
  28. #if MAVLINK_COMMAND_24BIT
  29. #define MAVLINK_MESSAGE_INFO_SET_POSITION_TARGET_GLOBAL_INT { \
  30. 86, \
  31. "SET_POSITION_TARGET_GLOBAL_INT", \
  32. 16, \
  33. { { "time_boot_ms", NULL, MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_set_position_target_global_int_t, time_boot_ms) }, \
  34. { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 50, offsetof(mavlink_set_position_target_global_int_t, target_system) }, \
  35. { "target_component", NULL, MAVLINK_TYPE_UINT8_T, 0, 51, offsetof(mavlink_set_position_target_global_int_t, target_component) }, \
  36. { "coordinate_frame", NULL, MAVLINK_TYPE_UINT8_T, 0, 52, offsetof(mavlink_set_position_target_global_int_t, coordinate_frame) }, \
  37. { "type_mask", NULL, MAVLINK_TYPE_UINT16_T, 0, 48, offsetof(mavlink_set_position_target_global_int_t, type_mask) }, \
  38. { "lat_int", NULL, MAVLINK_TYPE_INT32_T, 0, 4, offsetof(mavlink_set_position_target_global_int_t, lat_int) }, \
  39. { "lon_int", NULL, MAVLINK_TYPE_INT32_T, 0, 8, offsetof(mavlink_set_position_target_global_int_t, lon_int) }, \
  40. { "alt", NULL, MAVLINK_TYPE_FLOAT, 0, 12, offsetof(mavlink_set_position_target_global_int_t, alt) }, \
  41. { "vx", NULL, MAVLINK_TYPE_FLOAT, 0, 16, offsetof(mavlink_set_position_target_global_int_t, vx) }, \
  42. { "vy", NULL, MAVLINK_TYPE_FLOAT, 0, 20, offsetof(mavlink_set_position_target_global_int_t, vy) }, \
  43. { "vz", NULL, MAVLINK_TYPE_FLOAT, 0, 24, offsetof(mavlink_set_position_target_global_int_t, vz) }, \
  44. { "afx", NULL, MAVLINK_TYPE_FLOAT, 0, 28, offsetof(mavlink_set_position_target_global_int_t, afx) }, \
  45. { "afy", NULL, MAVLINK_TYPE_FLOAT, 0, 32, offsetof(mavlink_set_position_target_global_int_t, afy) }, \
  46. { "afz", NULL, MAVLINK_TYPE_FLOAT, 0, 36, offsetof(mavlink_set_position_target_global_int_t, afz) }, \
  47. { "yaw", NULL, MAVLINK_TYPE_FLOAT, 0, 40, offsetof(mavlink_set_position_target_global_int_t, yaw) }, \
  48. { "yaw_rate", NULL, MAVLINK_TYPE_FLOAT, 0, 44, offsetof(mavlink_set_position_target_global_int_t, yaw_rate) }, \
  49. } \
  50. }
  51. #else
  52. #define MAVLINK_MESSAGE_INFO_SET_POSITION_TARGET_GLOBAL_INT { \
  53. "SET_POSITION_TARGET_GLOBAL_INT", \
  54. 16, \
  55. { { "time_boot_ms", NULL, MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_set_position_target_global_int_t, time_boot_ms) }, \
  56. { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 50, offsetof(mavlink_set_position_target_global_int_t, target_system) }, \
  57. { "target_component", NULL, MAVLINK_TYPE_UINT8_T, 0, 51, offsetof(mavlink_set_position_target_global_int_t, target_component) }, \
  58. { "coordinate_frame", NULL, MAVLINK_TYPE_UINT8_T, 0, 52, offsetof(mavlink_set_position_target_global_int_t, coordinate_frame) }, \
  59. { "type_mask", NULL, MAVLINK_TYPE_UINT16_T, 0, 48, offsetof(mavlink_set_position_target_global_int_t, type_mask) }, \
  60. { "lat_int", NULL, MAVLINK_TYPE_INT32_T, 0, 4, offsetof(mavlink_set_position_target_global_int_t, lat_int) }, \
  61. { "lon_int", NULL, MAVLINK_TYPE_INT32_T, 0, 8, offsetof(mavlink_set_position_target_global_int_t, lon_int) }, \
  62. { "alt", NULL, MAVLINK_TYPE_FLOAT, 0, 12, offsetof(mavlink_set_position_target_global_int_t, alt) }, \
  63. { "vx", NULL, MAVLINK_TYPE_FLOAT, 0, 16, offsetof(mavlink_set_position_target_global_int_t, vx) }, \
  64. { "vy", NULL, MAVLINK_TYPE_FLOAT, 0, 20, offsetof(mavlink_set_position_target_global_int_t, vy) }, \
  65. { "vz", NULL, MAVLINK_TYPE_FLOAT, 0, 24, offsetof(mavlink_set_position_target_global_int_t, vz) }, \
  66. { "afx", NULL, MAVLINK_TYPE_FLOAT, 0, 28, offsetof(mavlink_set_position_target_global_int_t, afx) }, \
  67. { "afy", NULL, MAVLINK_TYPE_FLOAT, 0, 32, offsetof(mavlink_set_position_target_global_int_t, afy) }, \
  68. { "afz", NULL, MAVLINK_TYPE_FLOAT, 0, 36, offsetof(mavlink_set_position_target_global_int_t, afz) }, \
  69. { "yaw", NULL, MAVLINK_TYPE_FLOAT, 0, 40, offsetof(mavlink_set_position_target_global_int_t, yaw) }, \
  70. { "yaw_rate", NULL, MAVLINK_TYPE_FLOAT, 0, 44, offsetof(mavlink_set_position_target_global_int_t, yaw_rate) }, \
  71. } \
  72. }
  73. #endif
  74. /**
  75. * @brief Pack a set_position_target_global_int message
  76. * @param system_id ID of this system
  77. * @param component_id ID of this component (e.g. 200 for IMU)
  78. * @param msg The MAVLink message to compress the data into
  79. *
  80. * @param time_boot_ms [ms] Timestamp (time since system boot). The rationale for the timestamp in the setpoint is to allow the system to compensate for the transport delay of the setpoint. This allows the system to compensate processing latency.
  81. * @param target_system System ID
  82. * @param target_component Component ID
  83. * @param coordinate_frame Valid options are: MAV_FRAME_GLOBAL_INT = 5, MAV_FRAME_GLOBAL_RELATIVE_ALT_INT = 6, MAV_FRAME_GLOBAL_TERRAIN_ALT_INT = 11
  84. * @param type_mask Bitmap to indicate which dimensions should be ignored by the vehicle.
  85. * @param lat_int [degE7] X Position in WGS84 frame
  86. * @param lon_int [degE7] Y Position in WGS84 frame
  87. * @param alt [m] Altitude (MSL, Relative to home, or AGL - depending on frame)
  88. * @param vx [m/s] X velocity in NED frame
  89. * @param vy [m/s] Y velocity in NED frame
  90. * @param vz [m/s] Z velocity in NED frame
  91. * @param afx [m/s/s] X acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  92. * @param afy [m/s/s] Y acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  93. * @param afz [m/s/s] Z acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  94. * @param yaw [rad] yaw setpoint
  95. * @param yaw_rate [rad/s] yaw rate setpoint
  96. * @return length of the message in bytes (excluding serial stream start sign)
  97. */
  98. static inline uint16_t mavlink_msg_set_position_target_global_int_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
  99. uint32_t time_boot_ms, uint8_t target_system, uint8_t target_component, uint8_t coordinate_frame, uint16_t type_mask, int32_t lat_int, int32_t lon_int, float alt, float vx, float vy, float vz, float afx, float afy, float afz, float yaw, float yaw_rate)
  100. {
  101. #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
  102. char buf[MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN];
  103. _mav_put_uint32_t(buf, 0, time_boot_ms);
  104. _mav_put_int32_t(buf, 4, lat_int);
  105. _mav_put_int32_t(buf, 8, lon_int);
  106. _mav_put_float(buf, 12, alt);
  107. _mav_put_float(buf, 16, vx);
  108. _mav_put_float(buf, 20, vy);
  109. _mav_put_float(buf, 24, vz);
  110. _mav_put_float(buf, 28, afx);
  111. _mav_put_float(buf, 32, afy);
  112. _mav_put_float(buf, 36, afz);
  113. _mav_put_float(buf, 40, yaw);
  114. _mav_put_float(buf, 44, yaw_rate);
  115. _mav_put_uint16_t(buf, 48, type_mask);
  116. _mav_put_uint8_t(buf, 50, target_system);
  117. _mav_put_uint8_t(buf, 51, target_component);
  118. _mav_put_uint8_t(buf, 52, coordinate_frame);
  119. memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN);
  120. #else
  121. mavlink_set_position_target_global_int_t packet;
  122. packet.time_boot_ms = time_boot_ms;
  123. packet.lat_int = lat_int;
  124. packet.lon_int = lon_int;
  125. packet.alt = alt;
  126. packet.vx = vx;
  127. packet.vy = vy;
  128. packet.vz = vz;
  129. packet.afx = afx;
  130. packet.afy = afy;
  131. packet.afz = afz;
  132. packet.yaw = yaw;
  133. packet.yaw_rate = yaw_rate;
  134. packet.type_mask = type_mask;
  135. packet.target_system = target_system;
  136. packet.target_component = target_component;
  137. packet.coordinate_frame = coordinate_frame;
  138. memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN);
  139. #endif
  140. msg->msgid = MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT;
  141. return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  142. }
  143. /**
  144. * @brief Pack a set_position_target_global_int message on a channel
  145. * @param system_id ID of this system
  146. * @param component_id ID of this component (e.g. 200 for IMU)
  147. * @param chan The MAVLink channel this message will be sent over
  148. * @param msg The MAVLink message to compress the data into
  149. * @param time_boot_ms [ms] Timestamp (time since system boot). The rationale for the timestamp in the setpoint is to allow the system to compensate for the transport delay of the setpoint. This allows the system to compensate processing latency.
  150. * @param target_system System ID
  151. * @param target_component Component ID
  152. * @param coordinate_frame Valid options are: MAV_FRAME_GLOBAL_INT = 5, MAV_FRAME_GLOBAL_RELATIVE_ALT_INT = 6, MAV_FRAME_GLOBAL_TERRAIN_ALT_INT = 11
  153. * @param type_mask Bitmap to indicate which dimensions should be ignored by the vehicle.
  154. * @param lat_int [degE7] X Position in WGS84 frame
  155. * @param lon_int [degE7] Y Position in WGS84 frame
  156. * @param alt [m] Altitude (MSL, Relative to home, or AGL - depending on frame)
  157. * @param vx [m/s] X velocity in NED frame
  158. * @param vy [m/s] Y velocity in NED frame
  159. * @param vz [m/s] Z velocity in NED frame
  160. * @param afx [m/s/s] X acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  161. * @param afy [m/s/s] Y acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  162. * @param afz [m/s/s] Z acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  163. * @param yaw [rad] yaw setpoint
  164. * @param yaw_rate [rad/s] yaw rate setpoint
  165. * @return length of the message in bytes (excluding serial stream start sign)
  166. */
  167. static inline uint16_t mavlink_msg_set_position_target_global_int_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
  168. mavlink_message_t* msg,
  169. uint32_t time_boot_ms,uint8_t target_system,uint8_t target_component,uint8_t coordinate_frame,uint16_t type_mask,int32_t lat_int,int32_t lon_int,float alt,float vx,float vy,float vz,float afx,float afy,float afz,float yaw,float yaw_rate)
  170. {
  171. #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
  172. char buf[MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN];
  173. _mav_put_uint32_t(buf, 0, time_boot_ms);
  174. _mav_put_int32_t(buf, 4, lat_int);
  175. _mav_put_int32_t(buf, 8, lon_int);
  176. _mav_put_float(buf, 12, alt);
  177. _mav_put_float(buf, 16, vx);
  178. _mav_put_float(buf, 20, vy);
  179. _mav_put_float(buf, 24, vz);
  180. _mav_put_float(buf, 28, afx);
  181. _mav_put_float(buf, 32, afy);
  182. _mav_put_float(buf, 36, afz);
  183. _mav_put_float(buf, 40, yaw);
  184. _mav_put_float(buf, 44, yaw_rate);
  185. _mav_put_uint16_t(buf, 48, type_mask);
  186. _mav_put_uint8_t(buf, 50, target_system);
  187. _mav_put_uint8_t(buf, 51, target_component);
  188. _mav_put_uint8_t(buf, 52, coordinate_frame);
  189. memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN);
  190. #else
  191. mavlink_set_position_target_global_int_t packet;
  192. packet.time_boot_ms = time_boot_ms;
  193. packet.lat_int = lat_int;
  194. packet.lon_int = lon_int;
  195. packet.alt = alt;
  196. packet.vx = vx;
  197. packet.vy = vy;
  198. packet.vz = vz;
  199. packet.afx = afx;
  200. packet.afy = afy;
  201. packet.afz = afz;
  202. packet.yaw = yaw;
  203. packet.yaw_rate = yaw_rate;
  204. packet.type_mask = type_mask;
  205. packet.target_system = target_system;
  206. packet.target_component = target_component;
  207. packet.coordinate_frame = coordinate_frame;
  208. memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN);
  209. #endif
  210. msg->msgid = MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT;
  211. return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  212. }
  213. /**
  214. * @brief Encode a set_position_target_global_int struct
  215. *
  216. * @param system_id ID of this system
  217. * @param component_id ID of this component (e.g. 200 for IMU)
  218. * @param msg The MAVLink message to compress the data into
  219. * @param set_position_target_global_int C-struct to read the message contents from
  220. */
  221. static inline uint16_t mavlink_msg_set_position_target_global_int_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_set_position_target_global_int_t* set_position_target_global_int)
  222. {
  223. return mavlink_msg_set_position_target_global_int_pack(system_id, component_id, msg, set_position_target_global_int->time_boot_ms, set_position_target_global_int->target_system, set_position_target_global_int->target_component, set_position_target_global_int->coordinate_frame, set_position_target_global_int->type_mask, set_position_target_global_int->lat_int, set_position_target_global_int->lon_int, set_position_target_global_int->alt, set_position_target_global_int->vx, set_position_target_global_int->vy, set_position_target_global_int->vz, set_position_target_global_int->afx, set_position_target_global_int->afy, set_position_target_global_int->afz, set_position_target_global_int->yaw, set_position_target_global_int->yaw_rate);
  224. }
  225. /**
  226. * @brief Encode a set_position_target_global_int struct on a channel
  227. *
  228. * @param system_id ID of this system
  229. * @param component_id ID of this component (e.g. 200 for IMU)
  230. * @param chan The MAVLink channel this message will be sent over
  231. * @param msg The MAVLink message to compress the data into
  232. * @param set_position_target_global_int C-struct to read the message contents from
  233. */
  234. static inline uint16_t mavlink_msg_set_position_target_global_int_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_set_position_target_global_int_t* set_position_target_global_int)
  235. {
  236. return mavlink_msg_set_position_target_global_int_pack_chan(system_id, component_id, chan, msg, set_position_target_global_int->time_boot_ms, set_position_target_global_int->target_system, set_position_target_global_int->target_component, set_position_target_global_int->coordinate_frame, set_position_target_global_int->type_mask, set_position_target_global_int->lat_int, set_position_target_global_int->lon_int, set_position_target_global_int->alt, set_position_target_global_int->vx, set_position_target_global_int->vy, set_position_target_global_int->vz, set_position_target_global_int->afx, set_position_target_global_int->afy, set_position_target_global_int->afz, set_position_target_global_int->yaw, set_position_target_global_int->yaw_rate);
  237. }
  238. /**
  239. * @brief Send a set_position_target_global_int message
  240. * @param chan MAVLink channel to send the message
  241. *
  242. * @param time_boot_ms [ms] Timestamp (time since system boot). The rationale for the timestamp in the setpoint is to allow the system to compensate for the transport delay of the setpoint. This allows the system to compensate processing latency.
  243. * @param target_system System ID
  244. * @param target_component Component ID
  245. * @param coordinate_frame Valid options are: MAV_FRAME_GLOBAL_INT = 5, MAV_FRAME_GLOBAL_RELATIVE_ALT_INT = 6, MAV_FRAME_GLOBAL_TERRAIN_ALT_INT = 11
  246. * @param type_mask Bitmap to indicate which dimensions should be ignored by the vehicle.
  247. * @param lat_int [degE7] X Position in WGS84 frame
  248. * @param lon_int [degE7] Y Position in WGS84 frame
  249. * @param alt [m] Altitude (MSL, Relative to home, or AGL - depending on frame)
  250. * @param vx [m/s] X velocity in NED frame
  251. * @param vy [m/s] Y velocity in NED frame
  252. * @param vz [m/s] Z velocity in NED frame
  253. * @param afx [m/s/s] X acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  254. * @param afy [m/s/s] Y acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  255. * @param afz [m/s/s] Z acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  256. * @param yaw [rad] yaw setpoint
  257. * @param yaw_rate [rad/s] yaw rate setpoint
  258. */
  259. #ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
  260. static inline void mavlink_msg_set_position_target_global_int_send(mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t target_system, uint8_t target_component, uint8_t coordinate_frame, uint16_t type_mask, int32_t lat_int, int32_t lon_int, float alt, float vx, float vy, float vz, float afx, float afy, float afz, float yaw, float yaw_rate)
  261. {
  262. #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
  263. char buf[MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN];
  264. _mav_put_uint32_t(buf, 0, time_boot_ms);
  265. _mav_put_int32_t(buf, 4, lat_int);
  266. _mav_put_int32_t(buf, 8, lon_int);
  267. _mav_put_float(buf, 12, alt);
  268. _mav_put_float(buf, 16, vx);
  269. _mav_put_float(buf, 20, vy);
  270. _mav_put_float(buf, 24, vz);
  271. _mav_put_float(buf, 28, afx);
  272. _mav_put_float(buf, 32, afy);
  273. _mav_put_float(buf, 36, afz);
  274. _mav_put_float(buf, 40, yaw);
  275. _mav_put_float(buf, 44, yaw_rate);
  276. _mav_put_uint16_t(buf, 48, type_mask);
  277. _mav_put_uint8_t(buf, 50, target_system);
  278. _mav_put_uint8_t(buf, 51, target_component);
  279. _mav_put_uint8_t(buf, 52, coordinate_frame);
  280. _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT, buf, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  281. #else
  282. mavlink_set_position_target_global_int_t packet;
  283. packet.time_boot_ms = time_boot_ms;
  284. packet.lat_int = lat_int;
  285. packet.lon_int = lon_int;
  286. packet.alt = alt;
  287. packet.vx = vx;
  288. packet.vy = vy;
  289. packet.vz = vz;
  290. packet.afx = afx;
  291. packet.afy = afy;
  292. packet.afz = afz;
  293. packet.yaw = yaw;
  294. packet.yaw_rate = yaw_rate;
  295. packet.type_mask = type_mask;
  296. packet.target_system = target_system;
  297. packet.target_component = target_component;
  298. packet.coordinate_frame = coordinate_frame;
  299. _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT, (const char *)&packet, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  300. #endif
  301. }
  302. /**
  303. * @brief Send a set_position_target_global_int message
  304. * @param chan MAVLink channel to send the message
  305. * @param struct The MAVLink struct to serialize
  306. */
  307. static inline void mavlink_msg_set_position_target_global_int_send_struct(mavlink_channel_t chan, const mavlink_set_position_target_global_int_t* set_position_target_global_int)
  308. {
  309. #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
  310. mavlink_msg_set_position_target_global_int_send(chan, set_position_target_global_int->time_boot_ms, set_position_target_global_int->target_system, set_position_target_global_int->target_component, set_position_target_global_int->coordinate_frame, set_position_target_global_int->type_mask, set_position_target_global_int->lat_int, set_position_target_global_int->lon_int, set_position_target_global_int->alt, set_position_target_global_int->vx, set_position_target_global_int->vy, set_position_target_global_int->vz, set_position_target_global_int->afx, set_position_target_global_int->afy, set_position_target_global_int->afz, set_position_target_global_int->yaw, set_position_target_global_int->yaw_rate);
  311. #else
  312. _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT, (const char *)set_position_target_global_int, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  313. #endif
  314. }
  315. #if MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN
  316. /*
  317. This variant of _send() can be used to save stack space by re-using
  318. memory from the receive buffer. The caller provides a
  319. mavlink_message_t which is the size of a full mavlink message. This
  320. is usually the receive buffer for the channel, and allows a reply to an
  321. incoming message with minimum stack space usage.
  322. */
  323. static inline void mavlink_msg_set_position_target_global_int_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t target_system, uint8_t target_component, uint8_t coordinate_frame, uint16_t type_mask, int32_t lat_int, int32_t lon_int, float alt, float vx, float vy, float vz, float afx, float afy, float afz, float yaw, float yaw_rate)
  324. {
  325. #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
  326. char *buf = (char *)msgbuf;
  327. _mav_put_uint32_t(buf, 0, time_boot_ms);
  328. _mav_put_int32_t(buf, 4, lat_int);
  329. _mav_put_int32_t(buf, 8, lon_int);
  330. _mav_put_float(buf, 12, alt);
  331. _mav_put_float(buf, 16, vx);
  332. _mav_put_float(buf, 20, vy);
  333. _mav_put_float(buf, 24, vz);
  334. _mav_put_float(buf, 28, afx);
  335. _mav_put_float(buf, 32, afy);
  336. _mav_put_float(buf, 36, afz);
  337. _mav_put_float(buf, 40, yaw);
  338. _mav_put_float(buf, 44, yaw_rate);
  339. _mav_put_uint16_t(buf, 48, type_mask);
  340. _mav_put_uint8_t(buf, 50, target_system);
  341. _mav_put_uint8_t(buf, 51, target_component);
  342. _mav_put_uint8_t(buf, 52, coordinate_frame);
  343. _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT, buf, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  344. #else
  345. mavlink_set_position_target_global_int_t *packet = (mavlink_set_position_target_global_int_t *)msgbuf;
  346. packet->time_boot_ms = time_boot_ms;
  347. packet->lat_int = lat_int;
  348. packet->lon_int = lon_int;
  349. packet->alt = alt;
  350. packet->vx = vx;
  351. packet->vy = vy;
  352. packet->vz = vz;
  353. packet->afx = afx;
  354. packet->afy = afy;
  355. packet->afz = afz;
  356. packet->yaw = yaw;
  357. packet->yaw_rate = yaw_rate;
  358. packet->type_mask = type_mask;
  359. packet->target_system = target_system;
  360. packet->target_component = target_component;
  361. packet->coordinate_frame = coordinate_frame;
  362. _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT, (const char *)packet, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_MIN_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_CRC);
  363. #endif
  364. }
  365. #endif
  366. #endif
  367. // MESSAGE SET_POSITION_TARGET_GLOBAL_INT UNPACKING
  368. /**
  369. * @brief Get field time_boot_ms from set_position_target_global_int message
  370. *
  371. * @return [ms] Timestamp (time since system boot). The rationale for the timestamp in the setpoint is to allow the system to compensate for the transport delay of the setpoint. This allows the system to compensate processing latency.
  372. */
  373. static inline uint32_t mavlink_msg_set_position_target_global_int_get_time_boot_ms(const mavlink_message_t* msg)
  374. {
  375. return _MAV_RETURN_uint32_t(msg, 0);
  376. }
  377. /**
  378. * @brief Get field target_system from set_position_target_global_int message
  379. *
  380. * @return System ID
  381. */
  382. static inline uint8_t mavlink_msg_set_position_target_global_int_get_target_system(const mavlink_message_t* msg)
  383. {
  384. return _MAV_RETURN_uint8_t(msg, 50);
  385. }
  386. /**
  387. * @brief Get field target_component from set_position_target_global_int message
  388. *
  389. * @return Component ID
  390. */
  391. static inline uint8_t mavlink_msg_set_position_target_global_int_get_target_component(const mavlink_message_t* msg)
  392. {
  393. return _MAV_RETURN_uint8_t(msg, 51);
  394. }
  395. /**
  396. * @brief Get field coordinate_frame from set_position_target_global_int message
  397. *
  398. * @return Valid options are: MAV_FRAME_GLOBAL_INT = 5, MAV_FRAME_GLOBAL_RELATIVE_ALT_INT = 6, MAV_FRAME_GLOBAL_TERRAIN_ALT_INT = 11
  399. */
  400. static inline uint8_t mavlink_msg_set_position_target_global_int_get_coordinate_frame(const mavlink_message_t* msg)
  401. {
  402. return _MAV_RETURN_uint8_t(msg, 52);
  403. }
  404. /**
  405. * @brief Get field type_mask from set_position_target_global_int message
  406. *
  407. * @return Bitmap to indicate which dimensions should be ignored by the vehicle.
  408. */
  409. static inline uint16_t mavlink_msg_set_position_target_global_int_get_type_mask(const mavlink_message_t* msg)
  410. {
  411. return _MAV_RETURN_uint16_t(msg, 48);
  412. }
  413. /**
  414. * @brief Get field lat_int from set_position_target_global_int message
  415. *
  416. * @return [degE7] X Position in WGS84 frame
  417. */
  418. static inline int32_t mavlink_msg_set_position_target_global_int_get_lat_int(const mavlink_message_t* msg)
  419. {
  420. return _MAV_RETURN_int32_t(msg, 4);
  421. }
  422. /**
  423. * @brief Get field lon_int from set_position_target_global_int message
  424. *
  425. * @return [degE7] Y Position in WGS84 frame
  426. */
  427. static inline int32_t mavlink_msg_set_position_target_global_int_get_lon_int(const mavlink_message_t* msg)
  428. {
  429. return _MAV_RETURN_int32_t(msg, 8);
  430. }
  431. /**
  432. * @brief Get field alt from set_position_target_global_int message
  433. *
  434. * @return [m] Altitude (MSL, Relative to home, or AGL - depending on frame)
  435. */
  436. static inline float mavlink_msg_set_position_target_global_int_get_alt(const mavlink_message_t* msg)
  437. {
  438. return _MAV_RETURN_float(msg, 12);
  439. }
  440. /**
  441. * @brief Get field vx from set_position_target_global_int message
  442. *
  443. * @return [m/s] X velocity in NED frame
  444. */
  445. static inline float mavlink_msg_set_position_target_global_int_get_vx(const mavlink_message_t* msg)
  446. {
  447. return _MAV_RETURN_float(msg, 16);
  448. }
  449. /**
  450. * @brief Get field vy from set_position_target_global_int message
  451. *
  452. * @return [m/s] Y velocity in NED frame
  453. */
  454. static inline float mavlink_msg_set_position_target_global_int_get_vy(const mavlink_message_t* msg)
  455. {
  456. return _MAV_RETURN_float(msg, 20);
  457. }
  458. /**
  459. * @brief Get field vz from set_position_target_global_int message
  460. *
  461. * @return [m/s] Z velocity in NED frame
  462. */
  463. static inline float mavlink_msg_set_position_target_global_int_get_vz(const mavlink_message_t* msg)
  464. {
  465. return _MAV_RETURN_float(msg, 24);
  466. }
  467. /**
  468. * @brief Get field afx from set_position_target_global_int message
  469. *
  470. * @return [m/s/s] X acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  471. */
  472. static inline float mavlink_msg_set_position_target_global_int_get_afx(const mavlink_message_t* msg)
  473. {
  474. return _MAV_RETURN_float(msg, 28);
  475. }
  476. /**
  477. * @brief Get field afy from set_position_target_global_int message
  478. *
  479. * @return [m/s/s] Y acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  480. */
  481. static inline float mavlink_msg_set_position_target_global_int_get_afy(const mavlink_message_t* msg)
  482. {
  483. return _MAV_RETURN_float(msg, 32);
  484. }
  485. /**
  486. * @brief Get field afz from set_position_target_global_int message
  487. *
  488. * @return [m/s/s] Z acceleration or force (if bit 10 of type_mask is set) in NED frame in meter / s^2 or N
  489. */
  490. static inline float mavlink_msg_set_position_target_global_int_get_afz(const mavlink_message_t* msg)
  491. {
  492. return _MAV_RETURN_float(msg, 36);
  493. }
  494. /**
  495. * @brief Get field yaw from set_position_target_global_int message
  496. *
  497. * @return [rad] yaw setpoint
  498. */
  499. static inline float mavlink_msg_set_position_target_global_int_get_yaw(const mavlink_message_t* msg)
  500. {
  501. return _MAV_RETURN_float(msg, 40);
  502. }
  503. /**
  504. * @brief Get field yaw_rate from set_position_target_global_int message
  505. *
  506. * @return [rad/s] yaw rate setpoint
  507. */
  508. static inline float mavlink_msg_set_position_target_global_int_get_yaw_rate(const mavlink_message_t* msg)
  509. {
  510. return _MAV_RETURN_float(msg, 44);
  511. }
  512. /**
  513. * @brief Decode a set_position_target_global_int message into a struct
  514. *
  515. * @param msg The message to decode
  516. * @param set_position_target_global_int C-struct to decode the message contents into
  517. */
  518. static inline void mavlink_msg_set_position_target_global_int_decode(const mavlink_message_t* msg, mavlink_set_position_target_global_int_t* set_position_target_global_int)
  519. {
  520. #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
  521. set_position_target_global_int->time_boot_ms = mavlink_msg_set_position_target_global_int_get_time_boot_ms(msg);
  522. set_position_target_global_int->lat_int = mavlink_msg_set_position_target_global_int_get_lat_int(msg);
  523. set_position_target_global_int->lon_int = mavlink_msg_set_position_target_global_int_get_lon_int(msg);
  524. set_position_target_global_int->alt = mavlink_msg_set_position_target_global_int_get_alt(msg);
  525. set_position_target_global_int->vx = mavlink_msg_set_position_target_global_int_get_vx(msg);
  526. set_position_target_global_int->vy = mavlink_msg_set_position_target_global_int_get_vy(msg);
  527. set_position_target_global_int->vz = mavlink_msg_set_position_target_global_int_get_vz(msg);
  528. set_position_target_global_int->afx = mavlink_msg_set_position_target_global_int_get_afx(msg);
  529. set_position_target_global_int->afy = mavlink_msg_set_position_target_global_int_get_afy(msg);
  530. set_position_target_global_int->afz = mavlink_msg_set_position_target_global_int_get_afz(msg);
  531. set_position_target_global_int->yaw = mavlink_msg_set_position_target_global_int_get_yaw(msg);
  532. set_position_target_global_int->yaw_rate = mavlink_msg_set_position_target_global_int_get_yaw_rate(msg);
  533. set_position_target_global_int->type_mask = mavlink_msg_set_position_target_global_int_get_type_mask(msg);
  534. set_position_target_global_int->target_system = mavlink_msg_set_position_target_global_int_get_target_system(msg);
  535. set_position_target_global_int->target_component = mavlink_msg_set_position_target_global_int_get_target_component(msg);
  536. set_position_target_global_int->coordinate_frame = mavlink_msg_set_position_target_global_int_get_coordinate_frame(msg);
  537. #else
  538. uint8_t len = msg->len < MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN? msg->len : MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN;
  539. memset(set_position_target_global_int, 0, MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN);
  540. memcpy(set_position_target_global_int, _MAV_PAYLOAD(msg), len);
  541. #endif
  542. }