DTU_IAP_L4/MDK-ARM/RTE/Device/STM32L433CCTx/STM32L43x_44x_45x_46x.dbgconf

// File: STM32L43x_44x_45x_46x.dbgconf
// Version: 1.0.0
// Note: refer to STM32L43xxx STM32L44xxx STM32L45xxx STM32L46xxx Reference manual (RM0394)
//       refer to STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx STM32L451xx STM32L452xx STM32L462xx datasheets

// <<< Use Configuration Wizard in Context Menu >>>

// <h> Debug MCU configuration register (DBGMCU_CR)
//   <o.2>  DBG_STANDBY              <i> Debug Standby mode
//   <o.1>  DBG_STOP                 <i> Debug Stop mode
//   <o.0>  DBG_SLEEP                <i> Debug Sleep mode
// </h>
DbgMCU_CR = 0x00000007;

// <h> Debug MCU APB1 freeze register1 (DBGMCU_APB1FZR1)
//                                   <i> Reserved bits must be kept at reset value
//   <o.31> DBG_LPTIM1_STOP          <i> LPTIM1 counter stopped when core is halted
//   <o.25> DBG_CAN1_STOP            <i> bxCAN1 stopped when core is halted
//   <o.23> DBG_I2C3_STOP            <i> I2C3 SMBUS timeout counter stopped when core is halted
//   <o.22> DBG_I2C2_STOP            <i> I2C2 SMBUS timeout counter stopped when core is halted
//   <o.21> DBG_I2C1_STOP            <i> I2C1 SMBUS timeout counter stopped when core is halted
//   <o.12> DBG_IWDG_STOP            <i> Independent watchdog counter stopped when core is halted
//   <o.11> DBG_WWDG_STOP            <i> Window watchdog counter stopped when core is halted
//   <o.10> DBG_RTC_STOP             <i> RTC counter stopped when core is halted
//   <o.5>  DBG_TIM7_STOP            <i> TIM7 counter stopped when core is halted
//   <o.4>  DBG_TIM6_STOP            <i> TIM6 counter stopped when core is halted
//   <o.0>  DBG_TIM2_STOP            <i> TIM2 counter stopped when core is halted
// </h>
DbgMCU_APB1_Fz1 = 0x00000000;

// <h> Debug MCU APB1 freeze register 2 (DBGMCU_APB1FZR2)
//                                   <i> Reserved bits must be kept at reset value
//   <o.5>  DBG_LPTIM2_STOP          <i> LPTIM2 counter stopped when core is halted
// </h>
DbgMCU_APB1_Fz2 = 0x00000000;

// <h> Debug MCU APB2 freeze register (DBGMCU_APB2FZR)
//                                   <i> Reserved bits must be kept at reset value
//   <o.17> DBG_TIM16_STOP           <i> TIM16 counter stopped when core is halted
//   <o.16> DBG_TIM15_STOP           <i> TIM15 counter stopped when core is halted
//   <o.11> DBG_TIM1_STOP            <i> TIM1 counter stopped when core is halted
// </h>
DbgMCU_APB2_Fz = 0x00000000;

// <h> TPIU Pin Routing (TRACECLK fixed on Pin PE2)
//   <i> TRACECLK: Pin PE2
//   <o1> TRACED0
//     <i> ETM Trace Data 0
//       <0x00040003=> Pin PE3
//       <0x00020001=> Pin PC1
//   <o2> TRACED1
//     <i> ETM Trace Data 1
//       <0x00040004=> Pin PE4
//       <0x0002000A=> Pin PC10
//   <o3> TRACED2
//     <i> ETM Trace Data 2
//       <0x00040005=> Pin PE5
//       <0x00030002=> Pin PD2
//   <o4> TRACED3
//     <i> ETM Trace Data 3
//       <0x00040006=> Pin PE6
//       <0x0002000C=> Pin PC12
// </h>
TraceClk_Pin = 0x00040002;
TraceD0_Pin  = 0x00040003;
TraceD1_Pin  = 0x00040004;
TraceD2_Pin  = 0x00040005;
TraceD3_Pin  = 0x00040006;

// <h> Flash Download Options
//   <o.0> Option Byte Loading      <i> Launch the Option Byte Loading after a Flash Download by setting the OBL_LAUNCH bit (causes a reset)
// </h>
DoOptionByteLoading = 0x00000000;

// <<< end of configuration section >>>